Features and Benefits of Coil Cradles

Double Adjusting Plate Models
• Ease and simplicity of loading and trouble-free
   performance are bywords with Durant Coil Cradles.
• Cradle provides a constant slack loop of material on
   motorized models for feeding punch presses, roll
   forming, shears, slitters, etc.
  Can be used equally well in automatic or manual feed
   operations.
  Adjustments from minimum to maximum width can be made in
   less than one minute.
• All models have two adjustable side plates which are
   self-centering.
  Lifetime factory sealed bearings are supplied on all
   rolls. Heat treated and polished rolls are available at
   extra cost.
• On 1200 and 2000 Series a time delay switch is available
   for regulating the size of loop at an extra cost. On all
   other models this equipment is standard at no extra cost.
• On 1200 and 2000 Series there is an additional charge for 3
   phase current. Standard rate of speed is up to 90 FPM. On
   1200, 2000 and 3000 Series speeds may be changed to 125
   FPM without extra charge.  Standard speed on other
   units is 70 FPM.
• Three year warranty.
• Lowest standard pricing.
• Quantity discounts.

Pinch Roll Attachments
• Pinch rolls are recommended for all egg shaped rolls, thin
   or thick stocks, oily stocks, spring tempered material,
   lamination stock, and stocks with slitting camber.
  Used on metals between .010 and .160 thick.
  Used in conjunction with coil cradle to make positive feed
   of materials.
  Helps to accelerate the coils being used in the coil
   cradle and acts as a braking action of the coil of stock.
   Prevents coasting of coil when actuator shuts motor off.
  All rolls are hardened and polished, and mounted in sealed
   ball bearings.
• Easy loading and economy of time in reloading.
  Minimizes the marking of coil stock.

For catalogs, instant prices, delivery or application help on any item, call 001-401-781-7800, toll free (US only) 800-338-7268, telefax 001-401-738-2586 or online at http://www.durantco.com.